IPX7 IPX8 10m Immersion Test Machine 304 Stainless Steel 350L Water Immersion Tank

IPX7 IPX8 10m Submersion Test Machine , Containable 350L Water Immersion Tank

Generl specifications:

Test Principle⁴:

IPX8 Test: By filling the tank with compressed air and increasing the water surface pressure, the pressure in the water increases synchronously, thereby simulating different water depth environments.

Features:

• The device is equipped with a pressure sensor, which can display the internal pressure change synchronously.
• Cylinder lifting devices are installed on both sides of the tank, so that the lid can be lifted and lowered smoothly.
• The tank cover is fastened with stainless steel can lid flange fasteners, and the seal is firm.
• Timing is performed by a time relay, and timing starts after the internal pressure reaches the set value.
• After the test is complete, the device automatically vents the pressure.
• The tank cover is connected with a mechanical safety valve. If the set pressure exceeds the set pressure, the safety valve will release the pressure directly to ensure the safety of users.
• A hook is welded inside, which is convenient for users to fix and take samples.
• If the user needs to provide an external power supply for the sample, we can open a hole in the lid and provide a locking device (wire diameter <15mm)⁵.

The Main Technical parameters:

Installation requirements:

• Aisle: Before the equipment enters the factory, please confirm that the spacel in the aisle, elevator, laboratory, etc. of the factory area is sufficient for the equipment to pass through.
• Water source: Please prepare clean water source.
• Air source: Please prepare a compressed air source with an output pressure of 0.6-0.8Mpa⁷.
• Power supply:220V/50HZ, 100w；please check whether it is compatible.
• Site space:≥W1300×D1300×H2500mm
• The room needs to reserve a drain, and the bottom of the machine can be connected to a water pipe for drainage.

Remark:

1 The pictures in this document are for customer reference only, and there may be color differences between the actual model and the pictures.

2 This document only lists some test standards, which does not mean that other test requirements and standards cannot be conducted. Welcome to communicate and discuss with us.

3 One test only at the same time. The next project can be only carried out after the current test is completed. In addition, we can provide multi-functional customized test solutions according to user requirements.

4 The formula of the corresponding relationship between pressure and water depth: P=9.8d (Unit :kPa,m).

5 Please wear insulating gloves during power-on test to avoid personal safety problems.

6 The time unit of the test can be freely selected, and it can be adjusted through the time relay before starting the test.

7 The user needs to prepare an air compressor in advance (recommended gas storage capacity > 60L). If you need us to buy it on your behalf, you need to explain in advance.

8 The photos may not match the actual ones, and are for user reference only.

Product image:

pressure regulating valve

Tags: IPX8 water immersion test machine , Waterproof testing chamber , Environmental testing machine