IPX1-IPX9K Waterproof Testing Equipment , Precision Side Spray Climatic Testing Chamber

IPX1-IPX9K Waterproof Testing Equipment , Precision Side Spray Climatic Testing Chamber

Product Overview:

Product introduction:

The IPX1-9K side-spray test apparatus is designed to evaluate the ingress protection of electrical devices against water, from drips (IPX1) to high-pressure jets (IPX9K). The system integrates advanced pressure regulation and temperature control, ensuring compliance with international standards.

• A protective cover is installed at the bottom of the drip tank to prevent the head from being hurt by the nozzle during operation.
• The equipment uses a high-quality servo motor to drive the swing tube, so that the swing angle is more precise and the noise is low.
• For IPX5/6 testing, here are two spray modes:up and down sweeping water spray and fixed water spray⁵(spray water from left to right).
• The spray distance(IPX9/9K) can be adjusted manually to meet the standard (125±25mm).
• The outer layer of the water tank is pasted with thermal insulation cotton to reduce heat dissipation and ensure a constant water temperature.
• There is a water storage tank inside the equipment and a water level control system. When the water is full, it will prompt, and when it is short of water, it will alarm.
• The flow rate is automatically adjusted by an electronic flow sensor, and the flow data will be displayed on the touch screen in real time⁶.
• Use a pressure gauge to display the test water pressure.
• The sample power socket (220V, 10A) is mounted on the right wall of the inner box, which is convenient for the user to do the live test of the sample; and after the sample is powered on, the turntable rotation will be automatically adjusted to forward and reverse rotation to prevent winding ⁷.
• There is a waterproof lighting inside, which is convenient for users to observe the test situation.
• Controller: 7-inch touch screen + PLC, using Yuexin self-developed software, which can be switched to multiple languages⁸.
• Test time setting: 0-999min⁹.

Technical parameters for IPX1/2:

Technical parameters for IPX3/4K:

Technical parameters for IPX5/6K:

Technical parameters for IPX9K:

Remark:

1 The pictures in this document are for customer reference only, and there may be color differences between the actual model and the pictures.

2 This document only lists some test standards, which does not mean that other test requirements and standards cannot be conducted. Welcome to communicate and discuss with us.

3 Standard load-bearing upper limit of turntable is 50kg,but also can be customized per requirements.Turntables of φ200mm are provided for replacement.

4 One test only at the same time. The next project can be only carried out after the current test is completed. In addition, we can provide multi-functional customized test solutions according to user requirements.

5 If the sample height exceeds 150mm, it is recommended to choose the swing spray method.

6 Use flow sensor to adjust water flow automatically, the flow is set according to the corresponding test options, and does not support custom settings.

7 Please inform in advance if the voltage(220V) does not match the actual needs so that we can provide customized solutions for you.

8 At present, only Chinese and English interfaces are supported; if other languages are introduced, the software can be updated remotely.

9 It is recommended to set the test time according to the test standard. The water temperature will rise due to long time test which has an impact on the test results.

10 The data is calculated based on the dripping area, IPX1:0.6×0.6×(0.001-0.0015)=0.00036-0.00054m³/min(that is 0.36-0.54L/min).

11 200mm is the distance from the nozzle to the sample specified in the standard, and the user needs to adjust the height of the turntable to meet the distance requirement.

12 Multiple specifications of pendulum tubes can be provided, please confirm clearly before placing an order; if other specifications are added after purchase, the equipment needs to be returned to the factory to replace hardware and programs.

13 The specifications of swing pipe for IPX3/4 rain test, as shown in the figure below:

14 This distance is the range from the nozzle to the center of the turntable. If the user wants to extend the spraying distance, he needs to explain in advance.

15 Since the IPX5 water spray is in a parabolic shape, the water spray range will be lower than this height, and the measured maximum water spray height is close to 550mm.

16 The user needs to prepare an air compressor in advance (recommended gas storage capacity > 40L). If you need us to buy it on your behalf, you need to explain in advance.

17 The photos may not match the actual ones, and are for user reference only.

Detail image:

inner box

Tags: Ingress Protection Testing Machine ,IPX1-9K Environmental Machine ,IP Grade Test Chamber